Oil & Gas Pumping Solutions

Providing pumps and compressors that are used in critical services throughout the energy markets from applications in the exploration, production, processing and vapor recovery of oil and gas, to the production of biofuels, to the distribution of fuels through the supply chain, is key focus for PSG®. Energy products that are safely handled by PSG equipment include LPG/propane, natural gas/methane, butane, gasoline, jet fuels, kerosene, diesel/biodiesel, ethanol, lube oils and fuel oils.

Oil & Gas Solutions with Different Pump Technologies

There is a number of pump technologies that may have some advantages in certain applications, but when handling gasoline, oils, and fuels, pump performance attributes usually must include most or all of the following:

APPLICATION CHARACTERISTICS TECHNICAL FEATURES
Flow Rate Pressure Temp High Viscosity¹ Medium Viscosity² Low & Variable Viscosity³ Shear Sensitive Solids Handling Dry Run Seal-Less Self-Priming Repeatable
AODD up to 277 gpm
(63 m³/hr)		 up to 300 psi
(20.7 bar)		 350°F
(177°C)
AODD up to 235 gpm
(53 m³/hr)		 up to 120 psi
(8.2 bar)		 350°F
(177°C)
Centrifugal up to 7,000 gpm
(1,590 m³/hr)		 up to 375 psi
(25.9 bar)		 500°F
(260°C)
Eccentric Disc up to 198 gpm
(45 m³/hr)		 up to 145 psi
(10.0 bar)		 212°F
(100°C)
Internal Gear up to 500 gpm
(114 m³/hr)		 up to 200 psi
(13.8 bar)		 650°F
(343°C)
Metering Diaphragm 0.80-286 gph
(3.03-1,083 L/h)		 up to 4,000 psi
(275.8 bar)		 200°F
(93°C)
Regenerative Turbine up to 47.5 gpm
(10.8 m³/hr)		 up to 218 psi
(15 bar)		 -40 – 212°F
(-40 – 100°C)
Sliding Vane up to 2,100 gpm
(475 m³/hr)		 up to 200 psi
(13.8 bar)		 -40 – 500°F
(-40 – 260°C)

(1) High Viscosity is 100,000 SSU (21,600 CPS) and up
(2) Medium Viscosity is Up to 100,000 SSU (21,600 CPS)
(3) Low & Variable Viscosity is Under 1,000 SSU (216 CPS)
Data points will vary depending on material, size, and system conditions. Please consult the factory or authorized representative for details.

Want to talk further? Fill out the form below.